Filter
Top Products
120
Operation
MPEG4 Viewer Settings (continued)
Built-in Viewer (continued)
ⅥTitle Bar
For setting display items on the viewer screen.
For the MPEG4 Viewer, characters are displayed in the title bar of the window.
A Camera ID
Select
A
On
B
to display [Camera ID]. (Up to 16 alphanumeric characters will be
displayed.)
[Camera ID] can be specified on the [Basic Settings2] or [Camera] page. (
A
Page 51)
B Position Title
Select
A
On
B
to display the title of the position that is being displayed.
C Tracking Frame
When
A
On
B
is selected, the
A
Intelligent Tracking
B
status appears as
A
Standby
B
,
A
Recording
B
, or
A
Completed
B
on the screen. (
A
Page 69).
D Time
Select
A
On
B
to display the time.
E Format
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH, MM, and SS
denote hour, minute and second respectively. mm is equivalent to 1/100 seconds.
ⅥStream
For specifying settings for receiving MPEG4 stream.
A Stream
For selecting the protocol when the viewer acquires data from the camera.
When
A
HTTP
B
is selected, lost packets are recovered via resending. Camera may be
monitored using multiple viewers when
A
Multicast
B
is selected.
M
emo:
●
When playing back via multicast, start multicast sending on the [Streaming] page
of the camera unit.
[Streaming Page] (
A
Page 82)
Note:
●
When Built-in Viewer is launched with
A
Multicast
B
specified, a Windows firewall
warning may appear. In this case, select
A
unblock
B
and proceed.
●
If
A
block
B
is selected, the Windows firewall will block the multicast stream and
playback of multicast by the viewer will fail.
B HTTP Port
You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the [Protocol] page of the
camera. (
A
Page 81)
C Multicast IP
Address
You can change the multicast IP address.
The default address is 225.0.2.1.
D Multicast Port
You can change the multicast port number.
The default port number setting is 59152.
M
emo:
●
This is enabled when
A
Start
B
is selected for the [JPEG Control] item on the
[Streaming] page.
●
Specify the same value as the parameter that is set on the [Streaming] page of
the camera. (
A
Page 82)