Filter
Top Products
135
Getting to Know Nikon Capture 4 Camera Control
Changes to Custom Settings
Changes made to settings in the Custom Settings dialog are stored in the camera, not on the computer
hard disk. This means that changing settings in the Custom Settings dialog has the same effect as chang-
ing Custom Settings using camera controls.
Custom Settings
Custom Settings can not be saved to a separate fi le. Clicking the Reset button resets all Custom Settings
to their default values.
Settings That Can Not Be Adjusted from the Custom Settings Window
The Custom Settings listed below can not be adjusted in the Custom Settings window.
• Mirror lock-up for CCD cleaning (D1-series Custom Setting 8) /Cleaning mirror up (D100 setup menu):
can only be ad just ed from the camera
• RAW (NEF) image save (D1-series Custom Setting 28): if this option is set to “0” (off) when Nikon
Cap ture is started, a message will be displayed. Clicking OK in this dialog sets Custom Setting 28 to
“1” (uncompressed RAW image save enabled). Custom Setting 28 can only be returned to “0” from
the camera.
• ISO Auto (D100 Custom Setting 3) /ISO Boost (D1-series Custom Setting 31): can be ad just ed from the
Exposure 2 tab of the Camera Control window.
• PC Shooting Mode (D1-series Custom Setting 30): this option is adjusted from the Me chan i cal tab of
the Cam era Control window.
• Tone Compensation (D1-series Custom Setting 24) /Color Mode (D1X/D1H Custom Setting 32) /Hue
Ad just ment (D1X/D1H Custom Setting 33) /Noise Reduction (D100 Custom Setting 4): can be adjusted
from the Processing tab of the Camera Control window.
Custom Settings
Most of the custom settings stored in camera memory can be viewed and adjusted from the
Custom Settings window in Nikon Capture 4 Camera Control. For more information on Cus-
tom Set tings, see the doc u men ta tion pro vid ed with your camera.
1
Select Cus tom Settings… from the Camera menu
The Custom Settings dialog for the current camera will be displayed (
136).
2
Choose a Custom Settings bank (D2 series/D1 series/D200/D100 only)
Choose a Custom Settings bank (Custom Settings set) from the pop-up menu at the top
right corner or the Cus tom Settings dialog.
The banks available depend on the model of camera currently connected. When the D1
or D100 is con nect ed, you have a choice of banks A or B; when a D2-series, D1X, D1H, or
D200 camera is con nect ed, banks A, B, C, or D can be selected.
3
Click OK
After making any changes to Custom Settings, click OK to save changes in the camera
Custom Settings bank and exit the Custom Settings dialog.