Nikon Capture 4 Digital Camera User Manual


 
148
Appendix D
4
Is the IEEE 1394 interface board correctly registered with the system (Windows
only)?
Check whether:
• The “IEEE 1394 Bus Controller” is not displayed in the Device Manager
• The IEEE 1394 board is listed under “Other Devices” or “Unknown Devices”
• A yellow or red mark appears next to the listing for the IEEE 1394 board
If any of the above apply, the IEEE 1394 board has not been correctly registered with
the system. See the doc u men ta tion provided with the board for information on device
reg is tra tion.
Captured Images are Too Bright, Too Dark, Washed Out, or Out of Focus
• At default settings, Nikon Capture 4 does not modify images when they are cap tured from
the camera. In the General tab of the Preferences dialog, verify that your images are being
captured at Nikon Capture’s default settings and not at the settings of the last image cap-
tured. See “Pref er enc es” for more information (
98). Alternatively, check the settings in
the Curves, Color Balance, and Unsharp Mask windows. Choose the reset option from the
Settings menu for each window, or turn the Apply button for the window off.
• Are monitor settings correctly adjusted?
Try adjusting your monitor’s contrast/brightness, color system, etc. to be sure that it is
prop er ly set for viewing images. See the documentation provided with your monitor for
in struc tions on ad just ing monitor settings.