Filter
Top Products
126
4
SETUP (Cont.)
INFO
The amount of shooting information displayed on the Monitor/Viewfinder can be
changed with ON/OFF. With ON, all possible information is displayed. With OFF, the
minimum required information is displayed. See P. 12–19 for further information. To
change the information display during playback, see P. 143.
You can turn the beep sound (used for warnings, button operations, etc.) ON or OFF.
The factory default setting is ON ,but you can turn it OFF if the sound is undesirable.
(P. 121).
REC VIEW
You can choose whether or not the image being recorded is displayed in the
Monitor/Viewfinder during shooting (P. 121). Set it to OFF when you want to have the
next picture's subject displayed.
ON: The image being recorded onto the card is displayed in the Monitor/Viewfinder.
This is useful for a brief check of images you have just taken. Pressing the
shutter button halfway at any time displays the image the camera is currently
aimed at.
OFF:The image being recorded onto the card is not displayed. Instead, the subject
the camera is currently pointing at is displayed. This is useful when you want to
prepare your next shot while the previous image is being recorded.
Function
INFO REC VIEW
Mode
AUTO ON
*
ON
ON ON/OFF ON
ON ON/OFF ON
ON ON/OFF ON
P ON/OFF ON/OFF ON/OFF
A/S/M ON/OFF ON/OFF ON/OFF
ON ON/OFF ON
Mode Dial & Functions
* This function cannot be changed in this mode. The setting will be
the same as it is in the other modes.