Filter
Top Products
145
5
1
Select a still picture to add sound to by
using the Arrow pad.
2
Press to display the Menu, then select
referring to the chart on the previous
page.
3
When í is pressed, START appears. Point
the camera microphone towards the
subject, then press to start recording.
●During recording, a bar is displayed to show
that recording is proceeding.
PLAY (still pictures) (Cont.)
This function allows you to add sound after still pictures have been taken. You can
also change sound that has been already recorded.
Recording time is approx. 4 seconds for each picture.
Built-in Microphone
●To obtain the optimum sound, the Microphone should be placed no further than 1m
(3.3 ft) away from the subject.
●When a new sound is recorded, the original sound is erased.
● function is not available when the card is protected or when “ CARD FULL”
appears (indicating insufficient memory).
●Sound may not be recorded when a card has insufficient memory.
●Sound recording may also pick up camera noises (e.g. buttons clicking, shutter
movement, etc.).
Note: