Filter
Top Products
17
@ Spot metering/Macro mode (P. 70)
●Displayed when the Spot metering/Macro mode is selected by pressing the
(Macro/Spot) button.
No indication: Spot metering/Macro off, : Spot metering, : Macro, :
Spot metering/Macro
# White balance (P. 115, 116)
●Displayed when WB is set on the Menu.
No indication: Auto, : Daylight, : Overcast, : Tungsten light, :
Fluorescent, : One touch white balance
$ ISO (P. 102)
●Displays the ISO (AUTO, 100, 200, 400 or 800) selected on the Menu. When set
to AUTO, the ISO changes to 100 when the Mode dial is set to A/S/M. When
AUTO is selected, the ISO is automatically increased in low-light situations when
the flash is not used. This is to prevent blurring from camera shake.
% Manual Focus (P. 89, 90) MF
●Displayed when locking focus using the Manual focus function.
^ AF confirmation mark (P. 35, 40)
●Lights when the focus and exposure are locked by pressing the Shutter button
halfway. If the subject is out of focus, the mark blinks.
& Flash stand-by (P. 36, 77)
●The flash fires when lights by pressing the Shutter button halfway.
Camera shake warning (P. 72)
●Blinks if camera shake occurs because the subject is dark, the shutter speed is
too low, and the flash is closed.
Flash charge (P. 78)
●The flash is charging if blinks just after the flash is raised or after flash
shooting. Wait until stops blinking, then press the Shutter button.
Viewfinder/Monitor indications
— Shooting information (Cont.)
Name of parts
SLOW1
^
9
!
0
@
#
$
%
&
*
(