Filter
Top Products
56
3
Shutter button
2
Gently press the Shutter button all the way to
start shooting.
Ⅵ In the AUTO, P, A/S/M, , , mode (Still picture shooting)
The lower memory gauge lights up and the camera starts saving pictures to the card.
While the data is being stored, the card access lamp blinks. If space is still available
on the card and on the memory gauge, you can take another shot. If the card fills up
and the memory gauge lights all the way, you cannot take any more pictures.
Ⅵ In the mode (movie record)
During recording, lights in red and correct focusing and exposure are
maintained continuously.
3
ONLY for the mode (movie record)
To stop recording, press the Shutter button all the
way again. The card access lamp blinks and the
camera starts saving pictures to the card.
●When the camera finishes writing the movie to the
card, you can record another movie. Even if the
memory gauge shows space is available, you
cannot record another movie while the camera is
writing to the card.
Using the Shutter button (pressing all the way/halfway) and
focusing
1
Point the camera
towards the subject
and compose the
picture. Gently press
the Shutter button
halfway.
In the P mode
In the mode
Memory gauge
When focus and exposure are locked, the AF confirmation
mark lights.
Card access lamp
Memory gauge
~
Continued on next page