Filter
Top Products
26
1
Card basics (Cont.)
Inserting the card
1
Make sure the camera
is turned off (i.e. the
monitor and
viewfinder are off, and
the lens is not locked
into place).
2
Open the Card cover.
3
Insert the card fully
with the contact area
facing towards the
lens side. Insert until
you feel it locked into
place.
●Note the orientation of
the card. If it is inserted
incorrectly, it may
become jammed.
4
Close the cover tightly.
Ejecting the card
●A non-Olympus card or a card that was initialized on other devices (such as PC, etc.)
may not be recognized by the camera. Before use, be sure to initialize the card on
this camera (P. 147).
●NEVER open the card cover, eject the card, remove the batteries, or disconnect the
optional AC adapter while the camera is in use or the camera is communicating with
a computer. Doing so could destroy all data on the card.
●Destroyed data cannot be restored.
Note:
1
Make sure the camera
is turned off (i.e. the
monitor and
viewfinder are off, and
the lens is not locked
into place).
2
Open the Card cover.
3
Remove the card.