Filter
Top Products
70
3
(Macro/Spot) button
Selections
OFF
Display
No display
(factory default
setting)
Functions
Digital ESP metering: Meters the center of
the subject and the area around it.
Determined by metering within the AF target
mark. Use this mode when backlight is
making the subject darker. (Spot metering)
Set the Zoom lever to the maximum “W”
position, then move in close to the subject
(no closer than 0.1m (0.3 ft)) so that you
can fill the entire frame with your subject.
(Digital ESP metering, Macro mode)
Use this mode when you want to use Spot
metering while shooting in the Macro
mode. (Spot metering, Macro mode)
Supported working range
Mode Zoom “W” (max.) Zoom “T” (max.)
No Macro 0.6 m to ∞ (2.0 ft to ∞) 2.0 m to ∞ (6.5 ft to ∞)
Macro 0.1 m to 0.6 m (0.3 ft to 2.0 ft) 1.2 m to 2.0 m (3.9 ft to 6.5 ft)
Mode dial & Functions
Functions vary depending on the Mode dial setting.
AUTO
P
A/S/M
OFF (Digital ESP metering*)
OFF (Digital ESP metering*)
OFF (Digital ESP metering*), (Spot metering), (Macro mode),
(Spot metering, Macro mode)
* factory default setting
Metering methods and Macro mode
It is possible to select metering methods and focusing area. In the mode,
exposure is based on the value metered in the center of the frame. In the mode,
focusing is performed quickly in macro shooting. Each time you press the
(macro/spot) button, the spot metering/macro mode changes as shown below.
~
Continued on next page