Filter
Top Products
83
3
e.g. :When metering 2 points. (pressing twice)
The average values for the aperture and shutter speed as calculated by metering 2
points. These values are recalculated every time another metering point is added.
indicates the average
for the 2 metering
points. The average is
always shown at the
center of the bar.
ᮢ indicates how much
the present exposure
you are metering is
different from the
average exposure value.
The present exposure
can be fixed by pressing
the shutter button
halfway down. (The
present exposure is not
added to the average
value unless you press
)
When ࡗ moves ±3 far from the center of the bar (the average reading), the red
Éí
appears.
The reading with pressed. ࡗindicates
the number of times you have pressed the
button ࡗindicates the difference between the
metered and average readings.
(AE lock/Custom)/ (Rotation) button (Cont.)
●If any of the following buttons is pressed during Multi-metering, Multi-metering
exposure is canceled.
(flash mode) button, Mode dial, (macro/spot) button
Note: