Filter
Top Products
66
3
Self-timer shooting
Use a tripod to stabilize the camera.
1
Set the Mode dial to
the desired shooting
mode.
2
Press the DRIVE
button to display the
DRIVE mode selection
screen.
3
Press the DRIVE
button repeatedly
until appears.
4
Press the Shutter button all the way to start self-
timer shooting.
●The Self-timer lamp on the front of the camera lights
for about 10 seconds, then starts blinking. After
about 2 seconds, the blinking stops, and the Shutter
button is released.
●In the mode, shooting starts. To stop shooting in
the mode, wait until the camera stops shooting,
or press the Shutter button all the way again.
Ⅵ Canceling the self-timer mode
Press the DRIVE button.
The self-timer lamp turns off, but the self-timer
mode is not canceled.
●The self-timer mode will be canceled once self-timer shooting is complete.
Note:
Self-timer lamp
, ,
,
P, A/S/M,
Self-timer
DRIVE/ (Erase) button (Cont.)