Filter
Top Products
90
3
●Although MF is selected and the length indicator reaches the top of the bar,
focusing is not possible at ∞.
T Adjust by moving Ññ slightly while watching the viewfinder.
●Although the focus distance is saved, the picture goes out of focus.
T If the Zoom lever is pressed after Manual focus setting, the saved focus
distance may be changed. Try setting again.
TIPS
●To use the flash, shoot within the flash working range (P. 36).
●If OFF is selected in ALL RESET (P. 124), current settings are retained even when
the power is turned off.
Note:
(OK/Menu) button (Cont.)
7
To cancel the saved MF setting,
hold down again for more than 1
second to display the focus
distance selection screen.
8
Press É to select AF, then press
.
2m
3m
5m
8m
Ⅵ The MF can be locked at the same length as when you perform focus lock.
1 Focus on anything within the AF target mark.
Press the Shutter button halfway to focus lock.
The AF confirmation mark lights.
2 Without letting go of the Shutter button, hold
down for more than 1 second. The focus
distance screen appears. On the screen, MF is
selected and the focus distance is the same as
when you performed focus lock.
AF confirmation mark lights.
AF target mark
2m
3m
5m
8m