Filter
Top Products
58
3
Conditions 4 and 5
Auto focus may not work
properly even when the
AF confirmation mark
lights when you press
the Shutter button down
halfway.
4 Subjects at different
distances
5 Fast-moving subjects
Conditions
1 to 3
Auto focus may not work
properly. The AF
confirmation mark may
blink.
1 Subjects with low
contrast
2 Subjects in
excessively bright
light in the center of
the frame
3 Subjects with no
vertical lines
Shutter button (Cont.)
Subjects that are difficult to focus on
— When Auto focus does not work
Under certain types of conditions auto focus may not work properly. If you run into
problems, try the procedure below or switch to Manual focus (P. 89).
Position the AF target mark in
the viewfinder on an object
that is the same distance from
the camera as the subject,
then half-press the shutter
button to lock focus, while
keeping your finger half-
pressed on the shutter button,
frame the picture you want to
shoot, and then fully press the
shutter button (P.59).
Hold the camera vertically,
half-press the shutter button
and hold it down to lock the
focus. Re-position the camera
horizontally, compose the
picture and then fully press
the shutter button to take the
picture(P.59).