Filter
Top Products
78
3
●The flash may not give you the optimum result in Macro mode, especially with wide-
angle shooting. Check the result on the Monitor. If a conversion lens is attached to
the lens, it may reduce the output of the flash.
●If OFF is selected in ALL RESET (P. 124), all current settings are retained even when
the power is turned off.
Note:
●Flash does not fire even when the built-in flash is extruded.
T Flash does not fire in the following situations: When shooting a bright subject,
BKT setting (P.67), WHITE BOARD/BLACK BOARD in FUNCTION setting
(P.110), Panoramic shooting (P.108).
● (Flash stand-by) blinks.
T The flash is charging. Release the Shutter button and wait until the flash mark
lights steadily.
TIPS
(Flash mode)/ (Protect) button (Cont.)
Ⅵ Shutter speed and ISO when using Slow Synchronization
In P (program), A (aperture priority shooting) or S (shutter priority shooting) mode, if
shooting is attempted with Slow Synchronization, the slowest shutter speed available
varies according to the ISO setting. Even when the ISO is set to AUTO in the P mode,
the ISO is not increased automatically.
ISO setting 100 200 400 800
Available slowest shutter speed (sec.) 4 2 1 1/2