Filter
Top Products
129
4
SETUP (Cont.)
Adjusts the brightness of the Monitor/Viewfinder.
When the Monitor is OFF: Adjusts only the
Viewfinder's brightness.
When the Monitor is ON: Adjusts the Monitor's
brightness, causing identical changes in the
Viewfinder at the same time. (When the Monitor is
turned off, the Viewfinder's brightness returns to its
original setting.)
Ⅵ Adjusting the brightness
Select in the Menu (P.122), then press í.
screen appears. Brightness increases when you press
Ñ, while pressing ñ makes the screen darker. Press
to save the setting.
Sets the date and time. See “Getting started (P. 21)” or “Chart (P. 122)” for the setting
procedure.
screen
m/ft
Measurement units can be selected from either meters or feet in the manual focus
mode. (P. 123)
At close ranges, the camera replaces meters/feet with centimeters/inches.
BATTERY SAVE
Battery consumption while shooting can be reduced by setting this to ON (P. 123).
However, usable functions are restricted in some modes. See below for details.
●Regardless of the Sleep time chosen, the Viewfinder turns off after 30 sec. without
use.
●FULLTIME AF cannot be used.
●The Monitor cannot be used.
ADJUST
GO
CANCELCANCEL
~
Continued on next page