Filter
Top Products
64
3
1
Set the Mode dial to
the desired mode. If
you set the dial to ,
or , AF
Sequential shooting is
not possible.
3
Press the DRIVE button to display
the DRIVE mode selection screen.
Sequential Shooting & AF sequential shooting
2
Set the record mode
to any mode except
TIFF (P. 111, 114).
,,
,P,
A/S/M
Mode dial & Functions
Functions vary depending on the Mode dial setting.
AUTO Single-frame shooting
Single-frame shooting, Sequential shooting, Self-timer shooting
P Single-frame shooting, Sequential shooting ( , ), Self-timer
shooting, Auto bracket
A/S/M Single-frame shooting, Sequential shooting ( , ), Self-timer
shooting, Auto bracket*
Self-timer shooting
Single frame erasure
●Red-eye reduction flash (P. 75) is not available in Sequential Shooting and AF
sequential shooting.
●The flash does not function during Auto bracketing.
●If "OFF" is selected in “ALL RESET” (P. 124), all current settings except Self-timer
are retained even when the power is turned off.
●If the ISO is set to over 200, noise may appear under some shooting conditions (P. 102).
Note:
* Not available when the Mode dial is set to M.
DRIVE/ (Erase) button (Cont.)
~
Continued on next page