Filter
Top Products
39
2
Erasing pictures
1
Set the Mode dial to
.
●Procedures are the
same in Quick view as
in the normal playback
mode.
2
The card access lamp blinks and stored pictures
are read out. After that, the last recorded picture
appears. Select the picture you want to erase.
3
Press the (erase)
button.
4
When the ERASE
screen asking you to
confirm the erasure
appears, press Ñ to
select YES.
5
Press to erase the
picture.
Ⅵ To cancel erasure
Press ñ on the Arrow pad to select NO, and press or the button.
Ⅵ Check the following before erasing pictures.
●Make sure the card is not write-protected. If it is, remove the write-protect seal.
●NEVER open the card cover, eject the card, remove the batteries, or pull out the plug
when the card access lamp is blinking during picture erasure. Doing so may destroy
data stored on the card.
HQ
’01.12.23. 21:56 24
Jumps to the picture10 frames behind.
Displays the next picture.
Displays the previous
picture.
Jumps to the picture 10
frames ahead.
ERASE
YES
N O
SELECT GO
The selected setting is framed
in green.