Filter
Top Products
35
2
3
Point the camera towards the
subject and compose the picture.
4
Gently and slowly press the Shutter
button. The AF confirmation mark
lights. This state means that the
Shutter button is pressed halfway.
The focus and exposure are locked.
At this moment, do not release the
Shutter button.
5
Press the Shutter button all the way
from the position pressed halfway.
This state means that the Shutter
button is pressed fully. Shooting
starts.
Taking still pictures
1
Press the POWER switch to turn on
the camera. The lens locks into place
and the viewfinder turns on.
2
Press the (flash) switch to raise
the flash. The flash pops up
automatically. To shoot without the
flash, close the flash manually.
AF confirmation mark lights.
AF target mark
●The lower memory gauge lights up, the card access lamp blinks, and the camera begins storing
pictures on the card.
●If you take pictures continuously and the memory fills up, the memory gauge lights up all the way.
If this occurs, you cannot take any more pictures (P. 15).
~
Continued on next page
Number of storable still
pictures (P.113)