Filter
Top Products
101
7
Chapter 7 Menu description tables
USER MENU
USER MENU SELECT
SYSTEM SETTING
PAINT
OPERATION
SYSTEM MODE
OUTPUT SEL
GENLOCK
RB GAIN CONTROL
LOW SETTING
MID SETTING
CAMERA ID
SHUTTER SPEED
SHUTTER SELECT
USER SW
SW MODE
WHITE BALANCE MODE
LENS IRIS
CAMERA SETTING
USER SW GAIN
MATRIX
RGB BLACK CONTROL
COLOR CORRECTION
SYSTEM(USER)
PAINT(USER)
VF(USER)
OPERATION(USER)
FILE(USER)
MAINTENANCE(USER)
VTR(USER)
SKIN TONE DTL
KNEE/LEVEL
HIGH SETTING
ADDITIONAL DTL
GAMMA
VF
VF DISPLAY
VF MARKER
VF USER BOX
VF INDICATOR1
VF INDICATOR2
MODE CHECK IND
FILE
CARD READ/WRITE
CARD R/W SELECT
LENS FILE
LENS FILE CARD R/W
SCENE
INITIALIZE
MAINTENANCE
SYSTEM CHECK
DIAGNOSTIC
LENS ADJ
BLACK SHADING
WHITE SHADING
LENS FILE ADJ
VTR MENU
VTR FUNCTION
BATTERY SETTING2
MIC/AUDIO 1
BATTERY/TAPE
BATTERY SETTING1
UMID SET/INFO
MIC/AUDIO 2
TC/UB
VTR DIAG
MENU
MAIN MENU
OPTION MENU
OPTION
OPTION MODE
!LED
VIDEO OUT SETTING
MONITOR OUT SETTING
RC OUT SETTING
DOWNCON SETTING
REC FUNCTION
How to open the menus
USER MENU:
Press MENU button to display.
MAIN MENU:
Hold down MENU button for 3
seconds or more to display.
OPTION MENU:
Press MENU button while
holding down LIGHT button to
display.
7-1 Menu configuration
How to interpret the menu lists
Item
Variable
range
Remarks
<Notes>
≥There is a total of 42 camera-related items on three pages (14 items per page) and 14 VTR-related items on one page
which can be set.
≥The items with the shading cannot be selected using <USER MENU SELECT>.
≥The items with the underlining can be selected only using <USER MENU SELECT> on condition that all the items
(equivalent to the number of items on one page) are selected together. Individual items cannot be selected.
The following abbreviations indicate whether the menu changes are stored
(written) in the corresponding data or loaded (read) from the data.
The changes cannot be stored or loaded when “/” is indicated.
S: The changes can be stored or loaded as scene file data.
C: The changes can be stored or loaded using CARD READ/WRITE.
U: The changes can be stored or loaded as user data.
Refer to sections “7-6-4 SCENE” and “7-6-5 INITIALIZE.”
F: The changes can be stored or loaded as READ FACTORY DATA.
Refer to section “7-6-5 INITIALIZE.”
R: The changes can be stored or loaded using RC DATA SAVE.
Refer to section “5-10 Connection of the remote control unit (AJ-
RC10G).”
This column indicates the
variable range in which the
item can be set and the
choice of the settings which
can be selected for the item.
Described in this column are the
operations which can be expected to
result when the item’s settings are
selected.
SYSTEM MODE 1080-50i
1080-59.94i
720-50P
720-59.94P
For setting the system frequency and the
recording format of the unit.
When this item is switched, turn “OFF” the
POWER switch on the unit and then turn it
“ON” again.
CUF
Items selected in <USER MENU SELECT>