Filter
Top Products
109
7
Chapter 7 Menu description tables
(continued)
The underlining in the variable range column indicates the setting in the preset
mode.
Item
Variable
range
Remarks
B (PHASE) –63
:
+00
:
+63
For performing the hue correction for blue.
B-Cy (PHASE) –63
:
+00
:
+63
For performing the hue correction between
blue and cyan.
Cy (PHASE) –63
:
+00
:
+63
For performing the hue correction for cyan.
Cy-G (PHASE) –63
:
+00
:
+63
For performing the hue correction between
cyan and green.
G (PHASE) –63
:
+00
:
+63
For performing the hue correction for green.
G-Yl (PHASE) –63
:
+00
:
+63
For performing the hue correction between
green and yellow.
Yl (PHASE) –63
:
+00
:
+63
For performing the hue correction for yellow.
Yl-R (PHASE) –63
:
+00
:
+63
For performing the hue correction between
yellow and red.
Mg (PHASE) –63
:
+00
:
+63
For performing the hue correction for
magenta.
R (PHASE)
–63
:
+00
:
+63
For performing the hue correction for red.
R-Mg (PHASE) –63
:
+00
:
+63
For performing the hue correction between
red and magenta.
Mg-B (PHASE) –63
:
+00
:
+63
For performing the hue correction between
magenta and blue.
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
∫ MATRIX TABLE
OFF
A
B
For selecting the color correction table for
the linear matrix.
∫ COLOR
CORRECT
ON
OFF
For switching ON/OFF of the 12-axis
independent color correction.
7-3-5 LOW SETTING
Item
Variable
range
Remarks
∫ MASTER GAIN
–3dB
:
0dB
:
30dB
For setting the master gain to –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27 or 30 dB.
H.DTL LEVEL 00
:
10
:
63
For performing the horizontal detail
correction level setting.
V.DTL LEVEL 00
:
20
:
31
For performing the vertical detail correction
level setting.
DTL CORING 00
:
01
:
15
For performing the noise elimination level
setting for detail.
H.DTL FREQ. 00
:
18
:
31
For performing the horizontal detail
frequency selection.
LEVEL DEPEND. 0
1
:
5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, details of
dark sections are compressed.
If the numerical value is larger, details of
bright sections are also compressed.
MASTER GAMMA 0.30
:
0.45
:
0.75
For setting the master gamma.
(0.01 step)
BLACK GAMMA –3
:
OFF
:
+3
For setting the gamma curve for the dark
portion.
–3 to –1:
The dark portion is compressed.
OFF:
Standard state
+1 to +3:
The dark portion is extended.
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
S UFR
∫ COLOR
CORRECT
ON
OFF
For switching ON/OFF of the 12-axis
independent color correction of the position
selected with the GAIN switch (L, M, H).
SCUFR
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to “7-6-2 CARD R/W SELECT.”