Filter
Top Products
30
Chapter 4 Adjustments and settings for recording
4-1 Multi Format
4-1-1 Video system and Recording format
The unit employs a progressive scan (full pixel reading) CCD
system.
It is possible to select 11 kinds of the recording formats by
combinations of the SYSTEM MODE item and the CAMERA
MODE item on the <SYSTEM MODE> screen on the
SYSTEM SETTING page in the setting menu.
In any recording format, the CCD operates in progressive
(non-interlace) scan mode.
<Note>
When settings for SYSTEM MODE item are changed, the
message “TURN POWER: OFF” is displayed in the
viewfinder screen.
The settings for SYSTEM MODE item will change when the
POWER switch of the unit is turned “OFF” and then turned
“ON” again.
O Retain the state where the POWER switch of the unit is
turned OFF for at least 5 seconds.