Filter
Top Products
129
7
Chapter 7 Menu description tables
(continued)
Item
Variable
range
Remarks
FRONT VR CH1 FRONT
W.L.
REAR
ALL
OFF
For setting whether or not to make the audio
control operational for the input system
selected for CH1.
FRONT VR CH2 FRONT
W.L.
REAR
ALL
OFF
For setting whether or not to make the audio
control operational for the input system
selected for CH2.
MIC LOWCUT CH1 FRONT
REAR
W.L.
OFF
For selecting the microphone low-cut filter
for CH1.
MIC LOWCUT CH2 FRONT
REAR
W.L.
OFF
For selecting the microphone low-cut filter
for CH2.
MIC LOWCUT CH3 FRONT
REAR
W.L.
OFF
For selecting the microphone low-cut filter
for CH3.
MIC LOWCUT CH4 FRONT
REAR
W.L.
OFF
For selecting the microphone low-cut filter
for CH4.
LIMITER CH1 ON
OFF
For selecting the limiter for CH1.
LIMITER CH2 ON
OFF
For selecting the limiter for CH2.
AUTO LEVEL CH3 ON
OFF
For selecting the automatic adjustment of
the recording level.
AUTO LEVEL CH4 ON
OFF
For selecting the automatic adjustment of
the recording level.
CUE REC SELECT CH1
CH2
CH3
CH4
CH1+2
CH3+4
For selecting the signals to be recorded on
the CUE track.
7-8-5 MIC/AUDIO1
CUF
CUF
CUF
CUF
CUF
CUF
CUF
CUF
CUF
CUF
CUF
TEST TONE NORMAL
ALWAYS
OFF
CHSEL
For selecting the test signal.
NORMAL:
The test tone signal is output to all
the channels when the CAM/BAR
switch has been set to BAR and
the CH1 AUDIO IN switch has
been set to FRONT.
ALWAYS:
The test tone signal is always
output to all the channels when the
CAM/ BAR switch has been set to
BAR.
OFF: The test tone signal is not output.
CHSEL: The test tone signal is output to the
channels for which the CH1 or CH2
AUDIO IN switch has been set to
FRONT when the CAM/BAR switch
is set to BAR. It is not output to
CH3 or CH4.
Item
Variable
range
Remarks
CUF
7-8-6 MIC/AUDIO2
WIRELESS WARN ON
OFF
For selecting whether or not to output
warnings when the reception of the wireless
receiver is poor.
Item
Variable
range
Remarks
FRONT MIC
POWER
ON
OFF
For selecting the phantom power supply for
the front microphone.
REAR MIC POWER ON
OFF
For selecting the phantom power supply for
the rear microphone.
MONITOR SELECT STEREO
MIX
For selecting the format of the signals to be
output to the monitor.
FRONT MIC LEVEL –40dB
–50dB
For selecting the input level of the front
microphone.
REAR MIC CH1
LVL
–50dB
–60dB
For selecting the input level of the rear
microphone.
REAR MIC CH2
LVL
–50dB
–60dB
For selecting the input level of the rear
microphone.
REAR LINE IN LVL
For AJ-HDX900E
For AJ-HDX900P
–3dB
0dB
+4dB
For selecting the rear line input level.
AUDIO OUT LVL
For AJ-HDX900E
For AJ-HDX900P
–3dB
0dB
+4dB
For selecting the rear audio output level.
HEADROOM
For AJ-HDX900E
For AJ-HDX900P
18dB
20dB
For setting the headroom (reference level).
CUF
CUF
CUF
CUF
CUF
CUF
CUF
CUF
CUF
CUF
The underlining in the variable range column indicates the setting in the preset
mode.
<Note>
The frequency characteristics when the microphone low-cut
filter is applied are 200 Hz to 10 kHz.