Filter
Top Products
11
2
Chapter 2 Parts and their functions
1 POWER switch
This switch turns the power ON and OFF.
2 Battery mount
This is for attaching the Anton/Bauer battery pack.
3 DC IN (external power input) socket (XLR, 4-pin)
This unit is connected to an external DC power supply.
4 BREAKER switch
If an excessively high current flows inside the unit due to
some problem or other, the circuit breaker is tripped and
the power is automatically turned off to protect the unit.
Push this button in after an inspection has been
conducted or repairs performed inside the unit by a
qualified service person. If there are no problems, the
power will come back on.
5 VF connector
Viewfinder AJ-HVF21G (optional accessory) is connected
here.
Insert the connector for the viewfinder firmly until it clicks.
6 Shoulder belt fittings
The shoulder belt is attached here.
7 Light shoe
Use this to attach the video light, etc.
8 Lens mount (bayonet type)
The lens is attached to this mount.
9 Lens lever
This lever is tightened to secure the lens after it has been
attached to the lens mount.
: Lens mount cap
To remove the cap, push the lens lever 9 up.
Keep the cap in place while the lens is not attached.
; Lens cable/microphone cable clamp
This clamp is for anchoring the lens cable or microphone
cable.
< Tripod mount
Mount the tripod adapter (SHAN-TM700), available as an
optional accessory, when the unit is to be anchored to a
tripod.
= LENS jack (12-pin)
The connecting cord of the lens is connected to this jack.
For further details on the lenses that can be used, refer to
the operating instructions of the lenses concerned.
> Easy-to-adjust shoulder pad
The position of the shoulder pad can be adjusted
backward or forward so that the unit is balanced when it is
carried on the user’s shoulder.
? GPS connector
GPS unit AJ-GPS900G (optional accessory) is connected
here.
(GPS unit AJ-GPS900G is not available in Europe region.)
2
1
34
6
?
7
8
9
:
5
; <
=
>
6
2-1 Power supply and accessory mounting section