Filter
Top Products
116
Chapter 7 Menu description tables
(continued)
The underlining in the variable range column indicates the setting in the preset
mode.
7-4-2 VF MARKER
Item
Variable
range
Remarks
TABLE A
B
For selecting the VF MARKER setting table.
This item is used to set the current values of
table A or B which have been selected using
the menu items listed below.
CENTER MARK OFF
1
2
3
4
For selecting the center marker.
OFF: The center marker is not displayed.
1: + (large)
2: Center blank (large)
3: + (small)
4: Center blank (small)
SAFETY MARK OFF
1
2
For selecting the type of safety marker
frame.
OFF: The safety marker frame is not
displayed.
1: Box
2: Corner frames
SAFETY AREA 80%
:
90%
:
100%
For setting the size of the safety marker.
It is possible to set the size by units of 1%
with a fixed ratio between of width and
height.
FRAME SIG 4:3
13:9
14:9
VISTA
For setting the frame marker.
The VISTA setting is 16:8.65.
FRAME MARK ON
OFF
For selecting ON or OFF for the frame
marker.
FRAME LVL 0
:
15
For setting the level outside the frame
marker.
0: Equivalent to signal OFF (Blanking
state)
15: Same brightness as center area
CUFR
CUFR
CUFR
CUFR
CUFR
CUFR
CUFR
USER BOX ON
OFF
For setting whether the user box is displayed
in the viewfinder or not.
7-4-3 VF USER BOX
Item
Variable
range
Remarks
USER BOX WIDTH 1
:
13
:
100
For setting the horizontal width of the user
box.
USER BOX
HEIGHT
1
:
13
:
100
For setting the vertical height of the user
box.
USER BOX H POS –50
:
+00
:
+50
For setting the horizontal position of the user
box center.
USER BOX V POS –50
:
+00
:
+50
For setting the vertical position of the user
box center.
CUFR
CUFR
CUFR
CUFR
CUFR
O The user box can be displayed in any position as a box-
type cursor.