Panasonic AJ-HDX900P Camcorder User Manual


 
71
4
RESET?
YES
#
NO
< SCENE >
READ USER DATA
#
SCENE SEL :1
READ
WRITE
RESET
TITLE1 : ********
TITLE2 : ********
TITLE3 : ********
TITLE4 : ********
3
When the JOG dial button is pressed, the scene file
number starts flashing. Turn the JOG dial button to
select the scene file whose data is to be reset.
4
Press the JOG dial button to enter the scene file.
5
Turn the JOG dial button to move the arrow (cursor) to
the RESET item.
< SCENE >
READ USER DATA
SCENE SEL :1
READ
WRITE
#
RESET
TITLE1 : ********
TITLE2 : ********
TITLE3 : ********
TITLE4 : ********
6
When the JOG dial button is pressed, the following
message appears.
READ?
YES
#
NO
7
Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
The data stored in the scene file area of the units
internal memory is read, and the setting is completed.
8
Press the MENU button to exit the menu operations.
4
Press the JOG dial button to enter the scene file.
5
Turn the JOG dial button to move the arrow (cursor) to
the READ item.
< SCENE >
READ USER DATA
SCENE SEL :1
#
READ
WRITE
RESET
TITLE1 : ********
TITLE2 : ********
TITLE3 : ********
TITLE4 : ********
Returning the setting data used for the scene files
to the factory settings
1
Perform a menu operation to open the <SCENE>
screen.
2
Turn the JOG dial button to move the arrow (cursor) to
the SCENE SEL item.
6
When the JOG dial button is pressed, the following
message appears.
7
Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
The data stored in the scene file area of the units
internal memory is reset and the factory settings are
restored.
8
Press the MENU button to exit the menu operations.
Chapter 4 Adjustments and settings for recording
(continued)
< SCENE >
READ USER DATA
#
SCENE SEL :1
READ
WRITE
RESET
TITLE1 : ********
TITLE2 : ********
TITLE3 : ********
TITLE4 : ********
3
When the JOG dial button is pressed, the scene file
number starts flashing. Turn the JOG dial button to
select the scene file whose data is to be loaded.
1
Perform a menu operation to open the <SCENE>
screen.
2
Turn the JOG dial button to move the arrow (cursor) to
the SCENE SEL item.
Reading the setting data used for the scene files