Panasonic AJ-HDX900P Camcorder User Manual


 
51
4
Chapter 4 Adjustments and settings for recording
(continued)
Display item What is displayed Status when display appears
1 System mode
1080
720
This indicates the mode that the unit operates in.
1080 interlace mode
720 progressive mode
2 Camera mode
60i
30P
24P
24PA
50i
25P
60P
50P
This indicates the video systems for recording signals output from the
CCD on tape and outputting signals as HD SDI signals.
1080-59.94i
1080-29.97P or 720-29.97P
1080-23.98P or 720-23.98P (2-3 Pull-down)
1080-23.98P (2-3-3-2 Pull-down)
1080-50i
1080-25P or 720-25P
720-59.94P
720-50P
3 Shutter
speed/mode
11/¢¢.¢
1/60 (1/100) - 1/2000, HALF
This indicates that the shutter speed is set to SYNCHRO SCAN.
This indicates that a fixed shutter speed has been set.
4 Total length of
cassette tape
¢¢¢min
This indicates the total length of the cassette tape.
(This appears during a mode check.)
5 Remaining tape ¢¢¢min
=
END
=
INH
Under normal conditions, ¢¢¢min lights, and this starts flashing
while the tape is reaching the end.
When the tape has reached the end,
=
END lights.
When recording has been inhibited,
=
INH lights.
6 Units REC display
REC This appears when the extender unit has been connected to indicate
the units recording status using characters. It lights during recording,
and it flashes while the units mode is transferring to recording or
when a warning has been issued.
7 Battery type
PROPAC14 to AC_ADPT This indicates the type of battery selected on the menu. AC_ADPT
appears when an external DC power supply has been input.
8 Remaining battery
charge/voltage
¢¢.¢V
¢¢¢%
EMP
MAX
This indicates the remaining battery charge in 0.1V increments.
This indicates the remaining digital battery charge in percent.
This appears when the battery has no charge left.
This appears when the battery has a full charge.
This indicates the master gain setting.
Example: LOW = 0
When S.GAIN and DS.GAIN functions have been allocated to the
user switches, the corresponding gain values are displayed.
9 MODE CHECK
dedicated display
area (STATUS:
master gain, user
switch gain)
LOW/MID/HIGH
3 to 30
S.GAIN30/36
DS.GAIN6:/10:/12:/
15:/20:
This indicates the settings for signals output from the VIDEO OUT
connector.
This indicates the settings for signals output from the MON OUT
connector.
(FUNCTION) VIDEO OUT
MONI OUT
This indicates the current GAIN status.
This indicates the current GAIN status.
This indicates the current DS.GAIN value.
This indicates whether the current LINE MIX is ON or OFF.
This indicates the current shutter status.
This indicates the current WHITE BAL status.
This indicates whether the current extender setting is on EX2 or OFF.
This indicates whether the current black gamma setting is ON or OFF.
This indicates whether the current MATRIX setting is A, B or OFF.
This indicates whether the current COLOR CORRECTION setting is
ON or OFF.
This indicates the current filter status.
GAIN (0 dB)
GAIN (3 dB)
DS.GAIN
LINE MIX
SHUTTER
WHITE PRE.
EXTENDER
BLACK GAMMA.
MATRIX
COLOR COR.
FILTER
(Causes for ! LED
to light: Displayed
on the entire
screen.)
An exclamation mark (!)
appears next to items
selected on the ! LED
menu.
An exclamation mark
( ) appears next to
items for which the
! LED lights.
!
ON appears if the front CH1 control is enabled and OFF appears if it
is disabled.
ON appears if the front CH2 control is enabled and OFF appears if it
is disabled.
(AUDIO: front controls
enable/disable)
CH1: ON/OFF
CH2: ON/OFF