Panasonic AJ-HDX900P Camcorder User Manual


 
75
4
Chapter 4 Adjustments and settings for recording
(continued)
Select the file No.
Give a title to the selected file.
5
Turn the JOG dial button to move the arrow (cursor) to
the TITLE : item.
< LENS FILE >
FILE SELECT :1
READ
WRITE
RESET ALL
n
TITLE:
1:5:
2:6:
3:7:
4:8:
6
When the JOG dial button is pressed, the arrow (cursor)
moves to the title input area, and the input mode is
established.
< LENS FILE >
FILE SELECT :1
READ
WRITE
RESET ALL
m
TITLE:
1:5:
2:6:
3:7:
4:8:
10
When the title has been input, turn the JOG dial button
to move the arrow (cursor) to the : position.
< LENS FILE >
FILE SELECT :1
READ
WRITE
RESET ALL
m
TITLE:
222222222222
1:5:
2:6:
3:7:
4:8:
2
Turn the JOG dial button to move the arrow (cursor) to
the FILE SELECT item
4
Press the JOG dial button to enter the file number.
3
Press the JOG dial button and the file number will flash.
Turn the JOG dial button to select the file (1 to 8) to be
recorded.
< LENS FILE >
FILE SELECT :1
READ
WRITE
RESET ALL
n
TITLE:
1:5:
2:6:
3:7:
4:8:
7
Press the JOG dial button again and turn it until the
character to be set is displayed.
When the button is turned, the character displayed is
switched in the following sequence:
Space: )
7
letters: AZ
7
numbers: 09
7
symbols: , >, <, /, , . , x
8
Press the JOG dial button to enter the character.
9
Turn the JOG dial button to move the arrow (cursor) to
the next position (right), and repeat steps
7 and 8 to set
the characters (maximum of 12).
4-10-9 To save the lens file into the built-in
memory
1
Using the menu operations, open the <LENS FILE>
screen from the FILE page.