Filter
Top Products
76
Chapter 4 Adjustments and settings for recording
(continued)
11
When the JOG dial button is pressed, the arrow
(cursor) returns to the TITLE: item.
< LENS FILE >
FILE SELECT :1
READ
WRITE
RESET ALL
n
TITLE:
222222222222
1:5:
2:6:
3:7:
4:8:
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE ?
YES
n
NO
< LENS FILE >
FILE SELECT :1
READ
n
WRITE
RESET ALL
TITLE:
222222222222
1:5:
2:6:
3:7:
4:8:
12
Turn the JOG dial button to move the arrow (cursor) to
the WRITE position.
13
When the JOG dial button is pressed, the following
message appears.
14
Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
The current white shading correction value, the flare
compensation value, and the RB gain offset correction
value are stored in the built-in memory of the unit.
<Note>
The values will not be stored in the unit’s internal
memory if another menu screen is selected without
executing WRITE or if the menu is exited.
15
Press the MENU button twice upon completion of the
adjustment.
The setting menu is cleared, and the displays showing
the unit’s current statuses appear at the top and bottom
of the viewfinder screen.