Filter
Top Products
13
Operating preset memory (PMEM)
The preset memory of a remote camera can be operated from the unit.
The following settings that you have adjusted in advance can be stored
in preset memory.
z Pan/tilt positions
z Zoom positions
z Focus positions
z Lens iris settings (manual iris only)
z White balance settings
z If the MEM ENABLE button indicator is off, preset memory
operation is not possible. Press the button to turn on its indicator
and then perform operation.
z Preset numbers PMEM 1 to 10 are also used as start positions
when recalling tracing memory. Preset data may be overwritten or
deleted by tracing memory operation.
z The number of preset memory and data that can be registered
differ depending on the remote camera.
For details, check the operating instructions for the corresponding
model.
Notes
PMEM button
Number buttons
[1] to [50]
PMEM PAGE
button
PMEM PAGE
indicators
MEM SETTING button
MEM DELETE button
MEM STORE button
MEM ENABLE button
z Changing pages
Press one of the number buttons [1] to [50] to directly select any of the
50 preset memory.
Furthermore, pressing the PMEM PAGE button to change pages allows
you to operate up to 100 preset memory for each camera.
Press the PMEM
PAGE button
Page 1 selected Page 2 selected
Button indicator on Button indicator on
<Preset numbers and registered pages>
Preset number Page number Number button
PMEM 1 to PMEM 50 Page 1
[1] to [50]
PMEM 51 to PMEM 100 Page 2
Example: When specifying preset number “PMEM 51”
1. Press the PMEM page button to select Page 2.
2. Press number button [1].
z Lighting of number button indicators
The lighting method of the number buttons differs depending on the
remote camera or pan-tilt head that the unit is controlling.
<Lighting method of number button indicators>
Remote cameras and
pan‑tilt heads
Lighting method of number button
indicators
AW-HE50, AW-HE60,
AW-HE120
The indicators of the number buttons with
preset memory registered turn on.
AW-HE100, AW-PH360,
AW-PH405, AW-PH650,
AW-PH400
The indicator of the number button that
was last pressed turns on.
However, when preset memory is deleted
in DELETE mode, all of the number
buttons turn off.