Filter
Top Products
45
Setup Software
Setup Software is an application that allows you to configure the settings for connecting the unit with remote cameras and a switcher from a personal
computer.
When using Setup Software to configure the settings from a personal computer, observe the following.
z Do not perform any operation on the unit.
z Do not start Setup Software on any other computer in the same network.
z Do not use “Easy IP Setup Software” supplied with AW-HE120, AW-HE60, and AW-HE50.
Note
Installing the software
This section describes how to install Setup Software.
1. Insert the CD-ROM supplied with the unit into the CD-ROM drive of the personal computer on which the application is going to be installed.
2. Copy the entire folder containing “Setup Software” on the CD-ROM to the hard disk drive of the personal computer.
3. Double-click “RP120Tool.exe” in the copied “Setup Software” folder to start Setup Software.