Filter
Top Products
38
Loading data from a memory card (LOAD)
1.
Press one of the camera selection buttons
[CAMERA SELECT/GROUP SELECT] to select a remote
camera.
2.
Press the MENU button to turn on its indicator.
3.
Open SD LOAD menu [47].
LOAD MODE:SETUP
4.
Turn the F1 dial to select the type of data to load from
the memory card, and then press the F1 dial to confirm
the selection.
The file saved to the memory card is displayed on the second line of
the LCD panel.
LOAD MODE:MEM
RP10.m12
zYou can select a data type from SETUP, MEM, CAM, and
UPGRADE.
zWhen no memory card is inserted, “NO CARD!” appears.
5.
Turn the F2 dial to select a file, and then press the F2
dial to confirm the selection.
The data begins to be read from the memory card and transfered to
the unit or selected remote camera.
zWhen a file that cannot be loaded to the selected remote camera
is specified (when, for example, you specify a file of a remote
camera that is a different model), “LOAD FILE IMCOMPATIBLE!”
appears.
LOADING
...
NOT REMOVE CARD.
COMPLETE.
zWhen loading completes, “COMPLETE.” appears.
zWhen loading fails, “LOAD ERROR!” appears. Save the data to
the memory card again and then execute loading again. If loading
is still not possible, replace the memory card.
Deleting the files saved to a memory card
(DELETE)
1.
Press the MENU button to turn on its indicator.
2.
Open SD DELETE menu [48].
DEL MODE :SETUP
3.
Turn the F1 dial to select the type of data to delete, and
then press the F1 dial to confirm the selection.
The name of the file saved to the memory card is displayed on the
second line of the LCD panel.
DEL MODE :MEM
RP10.m12
zYou can select a data type from SETUP, MEM, CAM, and LOG.
For the operation when “INIT” is selected, refer to “Initializing a
memory card (INIT)” (page 37).
zWhen no memory card is inserted, “NO CARD!” appears.
4.
Turn the F2 dial to select a file to delete, and then press
the F2 dial to confirm the selection.
The file is deleted.
COMPLETE
zWhen deleting completes, “COMPLETE.” appears.
zWhen deleting fails, “DELETE ERROR!” appears. Save any
necessary files to a computer and then initialize the memory card.
Memory card operations (continued)