Filter
Top Products
50
Setting user authentication
To control remote cameras that have the user authentication function enabled, you need to set the user name and password on the AW-RP120.
Configure this setting on the “User Auth.” tab of this application.
1.
Enter the user name in the User Name
box.
2.
Enter the password in the Password box.
Entered characters are displayed as “*”.
3.
Enter the same password as above in the
Retype password box.
Entered characters are displayed as “*”.
4.
Click [SET].
The user name and password are set on
AW-RP120.
Clicking [REFRESH] clears the user name
and password.
Setup Software (continued)