Filter
Top Products
53
Table of setting items (menus)
Button
number
Menu name Setting item Remote camera
Initial value on
unit
(*1)
Setting
[21] SHUTTER 1. SHUTTER AW-HE120 – Off, Step, Synchro, ELC
AW-HE50, AW-HE60 – Off, Step, Synchro
AW-HE2 – “---”
AW-HE100 – Off, Step, Synchro
AW-HE870 – Off, Step, Synchro, ELC
AW-E860, AW-E750,
AW-E650, AW-E350
– Off, Step, Synchro, ELC
AK-HC1500, AK-HC1800 – Off, Step, Synchro
2. SPEED AW-HE120 – 59.94 Hz:
1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
50 Hz:
1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
AW-HE50, AW-HE60 – 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
AW-HE2 – “---”
AW-HE100 – 1/100, 1/250, 1/500, 1/1000, 1/2000
AW-HE870 – 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
AW-E860, AW-E750,
AW-E650, AW-E350
– 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
AK-HC1500, AK-HC1800 – VIDEO:
1/100, 1/120, 1/250, 1/500, 1/1000,
1/2000
FILM:
180.0, 172.8, 144.0, 120.0, 90.0, 45.0
[22] ND FILTER 1. ND FILTER – ND1, ND2, ND3, ND4
(Only when AW-HE870, AW-E860,
AW-E750, AW-E650, or AW-E350 is
connected)
Off, On
[23] FUNCTION 2. DEFROSTER – Off, On
3. WIPER – Off, On
4. HEATER/FAN
– Off, On
[24] CAMERA SETUP 1. CAM POWER GROUP ON GROUP OFF, GROUP ON, ALL OFF,
ALL ON
2. AUTO ON On On, Off
3. TALLY OUT Off On, Off
4. HOME POSITION SET SET
[25] RP SETUP 1. FOCUS/IRIS STANDARD STANDARD, EXCHANGE
2. P/T CURV 1 1 to 5
3. LCD BACKLIGHT On On, Off, 60, 120, 180
4. ENABLE BUTTON ACTIVE ACTIVE, LOCK
5. MENU CONTROL ACTIVE ACTIVE, LOCK
6. GLOBAL AREA Off On, Off
7. IP ADDRESS 192.168.0.9
8. SUBNETMASK 255.255.255.0
9. GATEWAY 192.168.0.1
10. MAC ADDRESS Displayed only
11. PORT CAM1 61000 61000 to 65534
…
…
…
110. PORT CAM100 61000 61000 to 65534
[26] PAN DIRECTION 1. CAM1 NORMAL NORMAL, REVERSE
…
…
…
100. CAM100 NORMAL NORMAL, REVERSE
[27] TILT DIRECTION 1. CAM1 NORMAL NORMAL, REVERSE
…
…
…
100. CAM100 NORMAL NORMAL, REVERSE
[28] ZOOM DIRECTION 1. CAM1 NORMAL NORMAL, REVERSE
…
…
…
100. CAM100 NORMAL NORMAL, REVERSE
[29] FOCUS DIRECTION 1. CAM1 NORMAL NORMAL, REVERSE
…
…
…
100. CAM100 NORMAL NORMAL, REVERSE
(*1) “–” indicates a setting saved to the remote camera.
A diagonal line indicates a setting that can only be displayed. It cannot be changed.