Filter
Top Products
36
Memory card operations
The unit allows you to use a memory card to perform the following
operations.
SAVE : Save the configuration data of the unit or a remote camera to a
memory card.
LOAD : Load the configuration data saved to a memory card to the unit
or a remote camera.
<Data Target for SAVE and LOAD>
Data
type
Description of
data
File names
*1
SAVE/
LOAD
SETUP
Configuration data
of unit
*2
RP01.s12 to
RP99.s12
SAVE and
LOAD
MEM
Preset data and
tracing data
*3
RP01.m12 to
RP99.m12
SAVE and
LOAD
CAM
Configuration data
of remote camera
*4
RP01.c12 to
RP99.c12
SAVE and
LOAD
UPGRADE
Unit version update
file
V*****.s12 to
V*****.s12
LOAD only
LOG Unit operation log
RP01.log to
RP99.log
SAVE only
*1 : When SAVE is executed on the unit, the file names above are
assigned automatically.
Also, after SAVE is executed on the unit, the file names can be
changed with a personal computer.
· About file names
SETUP: ********.s12
MEM: ********.m12
CAM: ********.c12
Use up to eight single-byte alphanumeric characters for the ********
part above. A file name other than the above may not be displayed
properly on the unit.
*2 : The IP address, subnet mask, and default gateway settings of the
unit are not target for the SAVE and LOAD operations.
*3 : Only the data for the selected remote camera.
The PRESET SPEED value set for each preset is loaded and
saved.
*4 : Only the data for the selected remote camera.
z SAVE and LOAD are not possible with the MEM and CAM items
of a camera connected via a serial connection.
Note
Precautions on handling memory cards
z Never remove a memory card while the memory card access lamp
is lit or blinking.
If you remove a memory card while the memory card access lamp is
lit or blinking, the data saved to the memory card may be lost.
z The data stored in a memory card may be lost due to, for example,
the loss or incorrect operation of the memory card.
We recommend saving any important data to a computer or other
device.
z Memory cards
Memory cards used with the unit should conform to SD or SDHC
standards.
Be sure to use the unit to format memory cards.
Memory cards with the following capacity can be used with the
unit.
SDXC memory cards and MultiMediaCards (MMC) are not
supported.
SD 8 MB to 2 GB
SDHC 4 GB to 32 GB
For the latest information not described in the Operating
Instructions, refer to the following websites.
(Japanese) http://panasonic.biz/sav/
(English) http://pro-av.panasonic.net/
zObserve the following points when using and storing the
memory cards.
• Avoid high temperature and humidity.
• Avoid water droplets.
• Avoid static electricity.