Filter
Top Products
42
<Setting items stored on the unit (cont.)>
√: Target, ―: Not target
Button
number
Menu name Setting item
INITIALIZE
ALL SETUP
[49] SYSTEM 2. SYSTEM VER ― ―
3. PROGRAM VER ― ―
4. FPGA VER ― ―
z For the factory default settings, refer to “Table of setting items (menus)” (pages 53 to 55).
Returning the unit to the factory default state (INITIALIZE) (continued)
Returning the unit to the factory default
state
1.
Press the MENU button.
2.
Open SYSTEM menu [49].
3.
Turn the F1 dial to display the “1. INITIALIZE” item.
1.INITIALIZE
ALL
4.
Turn the F2 dial to select “ALL” or “SETUP”, and then
press the F2 dial to confirm the selection.
INITIALIZE is executed.
ALL : Restores all settings to the factory default state (executes
INITIALIZE).
SETUP : Restores only some settings to the factory default state
(executes INITIALIZE).
z The unit needs to be rebooted after selecting “ALL” and then
executing INITIALIZE. Turn the power off and then back on.
Note