Filter
Top Products
56
Messages
When starting up and switching camera groups
Indication Description
Don't touch
PTZ Lever!
Do not operate the PAN/TILT lever
and the ZOOM button because they
are being initialized.
Connecting to
cameras
The unit is connecting to the remote
cameras.
Operation lock
Indication Description
LOCKED!
Operation is disabled.
(This appears when an operation
is performed while the indicator
of the ENABLE button of the
corresponding area is off.)
Preset memory
Indication Description
CAM### PMEM
STORE COMPLETE
Preset memory registration has
completed.
CAM### PMEM
DELETE COMPLETE
Preset memory deletion has
completed.
z A number is displayed instead of “#”
Tracing memory
Indication Description
CAM## TMEM
#m##s Remained.
# minutes ## seconds of recording
is still possible for the tracing
memory of CAM##.
TM##:
Standby Store.
The recording standby state of
tracing memory.
TM##:
Waiting Opr.
The recording operation wait state of
tracing memory.
TM##: #m##s
Storing.
Recording tracing memory.
TM##: #m##s/#m##s
Standby Recall.
The recall wait state of tracing
memory.
TM##: #m##s/#m##s
Recalling.
Recalling tracing memory.
TM##: #m##s/#m##s
Standby Restore.
The restore standby state of tracing
memory.
TM##: #m##s/#m##s
Restoring.
Restoring tracing memory.
Please wait
FLASH Accessing.
Writing data to the flash memory in
the unit after recording or restoring
tracing memory.
CAM GRP can't be
changed in TMEM
The camera group cannot be
switched in TMEM mode.
z A number is displayed instead of “#”