Filter
Top Products
57
Memory card
Indication Description
NO CARD!
No card is inserted.
INITIALIZING...
NOT REMOVE CARD.
Initializing.
SAVING...
NOT REMOVE CARD.
Saving data to the memory card.
Do not remove the memory card.
LOADING...
NOT REMOVE CARD.
Reading data from the memory card.
Do not remove the memory card.
COMPLETE.
Initializing, saving, or loading is
completed.
WRITE PROTECTED!
The memory card is write protected.
OVER 99FILES!
Saving is not possible because
there are already 99 files.
INSUFFICIENT
CAPACITY!
Saving is not possible because
there is insufficient free space in the
memory card.
LOAD FILE
IMCOMPATIBLE!
A file cannot be read by the unit
or selected remote camera. The
following files are incompatible.
z A file saved with a different model
than the currently selected remote
camera.
z A file containing corrupted data
z A number is displayed instead of “#”
IP connection settings
Indication Description
Unavailable
network setting.
The entered IP address, default
gateway, subnet mask, or port
number cannot be set.
Enter a correct value.
⇒ “Network settings of the unit” in
Basics (page 27)
7. IP ADDRESS
IP Duplicate!
The entered IP address is a
duplicate of a connection destination
IP address set for a camera number
or switcher.
#. CAM###
IP Duplicate!
The entered IP address is a
duplicate of either the IP address of
the unit or a connection destination
IP address for another camera
number or the switcher.
1. IP: SW
IP Duplicate!
The entered IP address is a
duplicate of either the IP address of
the unit or a connection destination
IP address set for a camera number.
Please reboot
AW-RP120
The unit needs to be rebooted.
Turn the unit’s power off and then
back on.
z A number is displayed instead of “#”
Messages (continued)