Filter
Top Products
6
Press the arrow button to move the $ mark to the
video clip that you want to attach.
7
Press the SET button.
œ The Erase Original Confirmation Screen appears.
8
Press j or l on the arrow button to select whether
or not to erase the original video clips when the new
one is saved.
To erase the original video clips: Select “YES”
To not erase the original video clips: Select “NO”
9
Press the SET button.
œ “PROCESSING” and then “LOADING” are displayed,
and then you return to the Edit Video Clip Screen.
œ The two video clips are joined together and saved as a
separate video clip.
œ If “YES” was selected at step 8, the original video clips
are erased as the joined video clip is saved.
œ To return to the Playback Setting Screen, press the
MODE button, or select “EXIT” and press the SET
button.
HELP
If “ DISK FULL” appears
œ This indicates that there is not enough available space on the disk to save the new video clip.
For more information, refer to “Concerning video clip editing” on page 136.
If “ SIZE ERROR” appears
œ If the resolutions of the video clips are different, they cannot be joined. To join video clips
together, select video clips recorded in the same resolution.
If “ BATTERY EMPTY” appears
œ Video clip editing cannot be performed because the remaining charge in the battery pack is too
low. Recharge the battery pack, replace it with a charged battery pack, or connect the AC
adapter/charger and then perform the video clip editing.
NOTE
œ Even if you select “YES” at step 8 and press the SET button, the original video clip will not be
erased if it is being protected. If you want it to be erased, you need to first remove the
protection (see page 152).
œ If the frame rates of the video clips being joined are different, the joined video clip will
automatically become the lower frame rate of the two (see page 86).
œ Video clips located in different folders cannot be joined. Move the video clips into the same
folder before joining them (see page 153).
0001 0002 0003
9-image Playback Screen
ERASE ORIGINAL?
YES
ÄNO
28/08/2001
19:00 100-0002
Erase Original Confirmation Screen
PROCESSING
28/08/2001
19:00 100-0002
English
140