Filter
Top Products
Ejecting the disk
Caution
Be careful not to let the disk fall
œ Depending on how you are holding the digital disk camera, when the disk is ejected, it may fall
out of the digital disk camera and become damaged. When ejecting the disk, be careful not to
let the disk fall from the disk holder.
1
If the digital disk camera is turned on, turn it off (see
page 35).
œ Press the power button for more than one second.
œ When the power is turned off, the displays on the
mode display panel and LCD monitor (or viewfinder)
turn off.
2
Push the EJECT lever in the direction of the arrow.
œ The disk holder opens slightly.
3
Open the disk holder in the direction of the
arrow.
œ When the disk holder is opened, the disk is
ejected.
4
Gently pull out the disk.
HELP
If the disk cannot be removed
œ If data on the disk is being accessed (the disk mark is rotating; see page 30), the disk holder
will not open when the EJECT lever is pushed. Wait until the disk mark stops rotating and the
digital disk camera turns off.
œ If the digital disk camera is on, the disk cannot be removed. Turn off the digital disk camera
and then eject the disk with the EJECT lever.
œ The disk can be removed in the power save mode (see page 35).
œ If the disk cannot be removed when the digital disk camera is off, turn the digital disk camera
back on and then off again, and then eject the disk with the EJECT lever.
Mode display
panel
Power button
EJECT lever
Viewfinder
Disk holder
LCD monitor
Disk
Open with
fingers here
Disk
Open with
fingers here
31
English