Filter
Top Products
Problem Cause Action
Reference
page
Miscellaneous Digital disk
camera does
not operate
immediately
after being
turned on.
Normal effect due to
internal structure.
When power is turned
on, disk contents are
read. While disk is
read, disk mark
appears rotating and
digital disk camera
cannot be operated.
Wait until disk mark
stops rotating.
30
Sounds can be
heard during
power save
mode.
Sounds from internal
circuitry.
Not a malfunction.
35
Remote control
does not work.
Remote control codes
do not match.
Set remote control
codes properly.
38
Remote control mode
is set to D.
Set remote control
mode to E.
124
Dust is inside viewfinder. 1 Remove screws (2)
on side of viewfinder.
14
2 Pull out and remove
eyecup.
3 Clean dust from
inside eyecup and
viewfinder with a
blower or soft cloth.
œ Be careful not to
allow dust to get
inside digital disk
camera.
4 Put eyecup back
to original position
and secure with
screws (2).
Eyecup
English
166