Filter
Top Products
PLAYING BACK FILES ON A TELEVISION SET
The images, video clips, and audio recording saved on the disk in the digital disk camera can
also be played back on a television set for viewing and listening. (When connected to a television
set, the speaker of the digital disk camera is muted.)
Connecting the television set
Connect the supplied AV cable from the AV output terminal on the digital disk camera to the
AUDIO and VIDEO input terminals on the TV.
œ Be careful not to connect the AV cable to the MIC input terminal.
œ The audio output from the digital disk camera is monaural.
œ After connecting the digital disk camera, be sure to switch the television to VIDEO or
external input.
Playing the files
œ To view images and video clips on the television, follow the same procedure used to play
them back on the digital disk camera itself.
œ To listen to audio recordings on the television, follow the same procedure used to play
them back on the digital disk camera itself.
œ Adjust the volume for the audio with the television controls. When the AV cable is
connected, the volume control on the digital disk camera does not work.
NOTE
œ The IDC-1000ZEX and IDC-1000ZE will play back images using a PAL format signal. It can
only be used for playback with a PAL standard television.
œ The IDC-1000ZU will play back images using an NTSC format signal. It can only be used for
playback with an NTSC standard television.
œ Some televisions may display a black frame around the image or cut off the edges of some of
the menu screens. This is a characteristic of the television and does not indicate a malfunction.
To video
input
terminal
To audio
input
terminal
Yellow plug
White plug
AV cable (supplied)
Plug
To AV output terminal
Terminal cover
Switch to VIDEO or external input
71
English