Filter
Top Products
The BATTERY CHARGE and AC ADAPTER lamps
The BATTERY CHARGE and AC ADAPTER lamps allow you to check the condition of the
battery pack and AC adapter/charger. If either of the lamps begins flashing, it indicates a
problem. Refer to the table below to check and remedy the problem.
BATTERY
CHARGE lamp
Off Power is not being supplied
œ Plug the power cord into a power outlet when using
the AC adapter/charger.
Charging is complete
œ Unplug the power cord from the power outlet.
On Charging
Flashing There is a problem with the battery pack
œ Immediately remove the battery pack.
œ Do not use a malfunctioning battery pack (the
battery pack has likely ended its usable life).
AC ADAPTER
lamp
Off The AC adapter/charger is not connected properly
œ When running the digital disk camera with the AC
power supply, plug one end of the power cord into
power outlet and the other into the power supply
socket on the AC adapter/charger, and plug the DC
cord into the DC IN terminal on the digital disk
camera.
The digital disk camera is not turned on
œ Press the power button to turn on the digital disk
camera.
On AC power is being supplied to the digital disk camera
Flashing There is a problem with the AC adapter/charger
œ Immediately unplug the power cord from the power
outlet.
œ Do not charge the battery pack.
œ Contact the place of purchase.
HELP
If the BATTERY CHARGE lamp does not turn off
œ If more than 150 minutes have elapsed since charging was begun and the BATTERY
CHARGE lamp does not turn off, there is a malfunction. If this occurs, immediately stop
charging and contact the place of purchase.
English
26