Filter
Top Products
1-30
DXC-D35/D35WS(UC)
DXC-D35P/D35WSP(CE) V1
58
Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Viewfinder Basic Menu
To display the basic menu pages, press the MENU/
STATUS switch downward while the normal
indications are being shown in the viewfinder. The
basic menu configuration can include up to eight pages
(the configuration depends on the switch settings and
the type of connected VTR).
Basic Menu Operations
The common operations on all basic menu pages are
described below.
To change the page or item
The cursor is moved downward each time you press
the MENU/STATUS switch down. Once the cursor
has reached the last item on a page, press down the
MENU/STATUS switch to go to the next page. When
the last page is being displayed, pressing down the
MENU/STATUS switch returns the display to the
normal indications.
The cursor is moved upward each time you press up
the MENU/STATUS switch. Once the cursor has
reached the first item on a page, pressing up the
MENU/STATUS switch returns the display to the
normal indications.
To change settings
After using the MENU/STATUS switch to move the
cursor to the item on which you will change the
setting, press either the UP/ON button or the DOWN/
OFF button to select the desired value.
To reset any item to its shipped settings, press the UP/
ON button and the DOWN/OFF button at the same
time.
Contents and Settings of Each
Page
Each page’s contents and settings are described below.
On the DXC-D35WSL/D35WSPL, when the MENU
MODE is set to 2 in advanced menu page 9, a page for
aspect ratio settings (16:9/4:3) is added before basic
menu page 1.
Basic menu page 1
Item
Settings
A. IRIS
Sets a base value
for auto adjustment
of lens iris.
–1.0, –0.5, ±0 (normal value), +0.5,
+1.0
Negative adjustment values set a
narrower lens iris and positive values
set a wider lens iris.
DTL LEV
Sets the detail
(edge) emphasis.
–99 to ±0 (normal value) to +99
Negative adjustment values soften the
image’s edges and positive values
sharpen them.
M. BLACK
Sets the master
pedestal level.
–99 to ±0 (normal value) to +99
Negative adjustment values make
dark areas of the picture darker and
increase the contrast. Positive
adjustment values dark areas of the
picture lighter and reduce the
contrast.
DXC-D35/D35WSL: 1/100 (normal
value), 1/250, 1/500, 1/1000, 1/
2000, EVS, CLS (60.4 Hz to 200.3
Hz)
DXC-D35P/D35WSPL: 1/60 (normal
value), 1/250, 1/500, 1/1000, 1/
2000, EVS, CLS (50.3 Hz to 201.4
Hz)
This selects either the shutter speed
or the scan frequency or EVS for the
clear scan function.
STRETCH
Sets black stretch/
compress value.
–16 to ±0 (normal value) to +15
This function adjusts the intensity of
dark areas of the screen. Negative
values make these areas darker
(black compress) and positive values
make these areas brighter (black
stretch).
SHUTTER
Sets shutter speed
or CLS/EVS setting
(see page 84)
.
Chapter 4 Viewfinder Screen Indications and Menus
59
Chapter 4 Viewfinder Screen Indications and Menus
Basic menu page 2
Basic menu page 3
This is displayed when the SET UP switch has been
set to FILE.
For details of this operation, see “Setup Files” (page 71).
Basic menu page 4
This menu is displayed only when an external sync
signal is input to the camera adaptor or VTR connected
to the camera head.
a) This applies when using an external sync signal to
synchronize operation of several cameras (see page
39).
Basic menu page 5
Item Settings
SKIN DTL
Sets the amount of
skin detail
correction.
0.0 (normal value) to 1.0
Smaller values set a softer skin detail.
LOW, STD (normal value), HIGH
Set the amount of DynaLatitude
effects as high level, standard level
(STD), or low level.
DL LEV
Sets the
DynaLatitude level.
PRE.WHT
Sets the color
temperature of the
preset white
balance.
When the FILTER control is set to 1
(3200K): 2200 to 3200 (normal value)
to 4300
When the FILTER control is set to 2
(5600K +
1
/
8
ND), 3 (5600K) or 4
(5600K +
1
/
64
ND): 4600 to 5600
(normal value) to 12000
Item Settings
SC PHASE
Sub carrier phase
adjustment for
when camera is
genlocked.
a)
000 (normal value) to 999
H PHASE
Horizontal phase
adjustment for
when camera is
genlocked.
a)
000 to 135 (normal value) to 199