Filter
Top Products
1-37
DXC-D35/D35WS(UC)
DXC-D35P/D35WSP(CE) V1
72
Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
To call up files recorded onto a tape (when
using the DSR-1/1P)
First, connect the DSR-1/1P to the camera head and
load the cassette that contains the recorded files.
1
Set the SET UP switch to FILE.
2
Access advanced menu page 10.
3
Move the cursor to SELECT FILE and use the UP/
ON button or the DOWN/OFF button to select
TAPE.
4
Move the cursor to CHG FILE and press the UP/
ON button.
The screen appears as shown below.
5
Press the UP/ON button to call up the file. To
abort the call up operation, press the DOWN/OFF
button (the display returns to the one shown in step
3).
During the call up operation, the following display
appears.
When the call up operation ends, the display
changes as shown below.
The settings of the camera head are now replaced
by the settings in the called file.
Name of file
recorded onto
tape
Setup Files
Chapter 4 Viewfinder Screen Indications and Menus
73
Chapter 4 Viewfinder Screen Indications and Menus
Changing File Settings
When using advanced menu page 11 or 12, you can
change the settings about picture quality in setup files.
(In basic menu page 1, a part of items are changeable.)
The changes are accepted only until another file is
called up, after which the original settings are restored.
If you save the changes, store the modified file as one
of the user files or record it in a cassette. (See the
following section “Saving File Settings”.)
1
Perform the steps described in “To call up files
recorded onto a tape (when using the DSR-1/1P)”
above to call up the selected file.
2
Access advanced menu page 11 or 12.
a) An asterisk (*) appears in front of any factory preset
file whose contents have been revised at least once.
3
Make the desired changes.
Page 11
See “Basic menu page 1”
(page 58).
Item
Settings
M.BLACK, STRETCH and
DTL LEV
M.GAMMA
Adjusts the gamma curve.
V DTL LEV
Adjusts the vertical detail.
–99 to ±0 (normal value) to
+99
DTL FREQ
Adjusts the central
frequency of the detail.
LL, L, M (normal value), H,
HH
–99 to ±0 (normal value) to
+99
Currently selected
file
a)
Currently selected
file
a)
Page 12
Saving File Settings
Files whose settings have been changed for certain
shooting conditions can be saved as a user file or onto
a tape (when using the DSR-1/1P).
For details, see “To save setup files to a tape (when using
the DSR-1/1P)” (page 74).
1
Set the SET UP switch to FILE.
2
Call up a setup file whose settings approximate the
desired shooting conditions and then change some
of the settings.
For details of this operation, see “Calling up a Setup
File” (page 71), “Changing File Settings” (in the left
column on this page), “Basic Menu Operations” (page
58), and “Advanced Menu Operations” (page 64).
Item
Settings
SAT
Adjusts the saturation of the
image.
–99 to ±0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
HUE
Adjusts the hue of the
image.
–99 to ±0 (normal value) to
+99
SKIN SAT
Adjusts the saturation in the
specified area of the image.
–99 to ±0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
SKIN HUE
Adjusts the hue in the
specified area of the image.
–99 to ±0 (normal value) to
+99
SET UP switch
(continued)