Filter
Top Products
2-23
DXC-D35/D35WS(UC)
DXC-D35P/D35WSP(CE) V1
..
..
. Page 17 Color Temperature Calculation Reference Setting
COLOR TEMP CAL. Captures the reference value of color temperature
indication
R R channel's color temperature indication ;
. Reference value setting
. Result of capturing the reference value
B B channel's color temperature indication ;
. Reference value setting
. Result of capturing the reference value
m
In COLOR TEMP CAL., it captures the color temperature calculation
reference value during operating of White Balance auto adjusment.
Normally, it is not necessary to perform this adjustment.
If the color temperature value, which is indicated on the screen, differs from
an actual value, perform CCD OUT level adjustment and etc. and to capture
the reference value as follows:
1. Shoot the pattern (color temperature = 3200 K).
2. Set the WHT BAL switch to A or B, and perform Auto White adjust-
ment.
3. Move the cursor on the COLOR TEMP CAL. position and push the UP
/ON button.
MIC ADJ Setting of musical note mark indication level
..
..
. Page 16 CLIP/IRIS Related Setting
WHT CLIP Standard value setting of WHITE CLIP level
HI L.SAT Setting of saturation in the high-light portion
IRIS GAIN Setting of auto iris following speed
IRIS MODE
Setting of auto iris’s peak and average values.
IRIS SET Setting of the target value of auto iris
LOW LIGHT Setting of LOW LIGHT warning indication level
*
For DXC-D35/D35WS : 152
For DXC-D35P/D35WSP : 160
..
..
. Page 15 Various Setting 3
M.GAMMA Standard value setting of master GAMMA
R.GAMMA R channel’s GAMMA offset setting
B.GAMMA B channel’s GAMMA offset setting
M.BLACK Standard value setting of master BLACK
M.GAMMA
R.GAMMA
B.GAMMA
M.BLACK
:
:
:
:
132
± 0
± 0
2083
PAGE15 (NEXT PREV )
EXIT MENU (YES )
WHT CLIP
HI L.SAT
IRIS GAIN
IRIS MODE
IRIS SET
LOW LIGHT
255
152
128
100
144
152
:
:
:
:
:
:
PAGE16 (NEXT PREV )
EXIT MENU (YES )
COLOR TEMP CAL.
MIC ADJ : 130
R
B
128
128
:
:
PAGE17 (NEXT PREV )
EXIT MENU (YES )
(YES PUSH)
2-12. Service Mode Operation