Filter
Top Products
2-6
DXC-D35/D35WS(UC)
DXC-D35P/D35WSP(CE) V1
8. Take a new CCD unit out of a transport holder and
install it to the unit in the reverse order of steps 1 to 7.
9. Perform the pedestal alignment (in Section 3-3-12), the
shading alignment (in Section 3-3-13) and the flare
alignment (in Section 3-3-14).
m
. Before performing alignment, be sure to read each
item in Section 3-1-4 “Note on Alignment”.
. Reuse the transport holder to transport the CCD unit
removed from the unit.
CCD unit
Transport holder
Screws (P3 x 6)
2-3. Replacement of CCD Unit