Filter
Top Products
Allows you to adjust and register an autofocused position for each lens, when
using an A-mount lens with the Mount Adaptor LA-EA2 or LA-EA4 (sold
separately).
1. Select MENU → (Custom Settings) → [AF Micro Adj.].
2. Select [AF Adjustment Set.] → [On].
3. [amount] → desired value.
You can select a value between −20 and +20. The larger the value you
select, the farther the autofocused position will be from the product. The
smaller the value you select, the closer the autofocused position will be to
the product.
Note
It is recommended that you adjust the position under actual shooting conditions.
When you attach a lens for which you have already registered a value, the
registered value appears on the screen. [±0] appears for lenses for which a
value has not yet been registered.
If [−] is displayed as the value, then a total of 30 lenses have been registered
and no new lens can be registered. To register a new lens, attach a lens for
which the registration can be erased, and set its value to [±0], or reset the
values of all the lenses using [Clear].
The [AF Micro Adj.] supports Sony, Minolta, or Konica-Minolta lenses. If you
perform [AF Micro Adj.] with lenses other than the supported lenses, the
registered settings for the supported lenses may be affected. Do not perform
[AF Micro Adj.] with an unsupported lens.
You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konica-
Minolta lens of the same specification.
[82] How to Use Using shooting functions Adjusting the focus
Disp. cont. AF area
You can set whether or not to display the area that is in focus when [Focus Area]