Filter
Top Products
compensation changes the amount of flash light along with the change of the
shutter speed and aperture.
1. MENU → (Camera Settings) → [Flash Comp.] → desired setting.
Selecting higher values (+ side) makes the flash level higher, and lower
values (– side) makes the flash level lower.
Note
[Flash Comp.] does not work when the shooting mode is set to the following
modes:
[Intelligent Auto]
[Superior Auto]
[Sweep Panorama]
[Scene Selection]
The higher flash effect may not be visible due to the limited amount of flash light
available, if the subject is outside the maximum range of the flash. If the
subject is very close, the lower flash effect may not be visible.
[55] How to Use Using shooting functions Using the flash
FEL Lock
The flash level is automatically adjusted so that the subject gets the optimum
exposure during normal flash shooting. You can also set the flash exposure in
advance.
FEL: Flash Exposure Level
1. MENU → (Custom Settings) → [Custom Key Settings] → desired button
→ Select [FEL Lock toggle] to register the function.
2. Center the subject on which FEL is to be locked, and adjust the focus.
3. Press the button to which [FEL Lock toggle] is registered, and set the flash
amount.
A pre-flash flashes.
The (FEL lock) icon lights up.