Filter
Top Products
Do not expose the product to chemical products such as thinner, benzine,
alcohol, disposable cloths, insect repellent, sunscreen or insecticide.
Do not touch the product with any of the above on your hand.
Do not leave the product in contact with rubber or vinyl for a long time.
Cleaning the monitor
If oil from your hand or hand cream, etc., remain on the monitor, the original
coating may become easily removable. Wipe oil or hand cream off as soon as
possible.
If you wipe the monitor firmly using tissue paper, etc., the coating may be
scratched.
If the monitor becomes dirty with fingerprints or dust, gently remove the dust
from the surface, and then clean the monitor using soft cloth, etc.
[288] How to Use Precautions/This product Cleaning this product
Cleaning the image sensor
Follow the steps below to clean the image sensor.
1. Turn off the product.
2. Remove the lens.
3. Blow off dust on and around the image sensor surface using a blower for
camera cleaning.
4. Attach the lens.
Note
A blower is not supplied with this product. Use a commercially available blower
for camera cleaning.
Do not use a spray-type blower as doing so may scatter water droplets inside
the product body.
Do not insert the tip of the blower into the cavity beyond the lens mount area, in
order to make sure that the tip of the blower does not touch the image sensor.