This setting shoots three images continuously with an exposure value shifted by
plus or minus 2.0 EV.
Cont. Bracket: 2.0EV 5 Image:
This setting shoots five images continuously with an exposure value shifted by
plus or minus 2.0 EV.
Cont. Bracket: 3.0EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by
plus or minus 3.0 EV.
Cont. Bracket: 3.0EV 5 Image:
This setting shoots five images continuously with an exposure value shifted by
plus or minus 3.0 EV.
Note
The last shot is shown on the Auto Review.
When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is
changed by adjusting the ISO value. If a setting other than [ISO AUTO] is
selected, the exposure is changed by adjusting the shutter speed.
When you adjust the exposure, the exposure is shifted based on the
compensated value.
Bracket shooting is unavailable in the following situations:
The shooting mode is set to [Intelligent Auto], [Superior Auto], [Scene Selection], or
[Sweep Panorama].
When the flash is used, the product performs flash bracket shooting, which
shifts the amount of flash light even if [Cont. Bracket] is selected. Press the
shutter button for each image.
[110] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Single Bracket
Shoots multiple images while automatically shifting the exposure from base to
darker and then to lighter. Press the shutter button for each image. You can
select an image that suits your purpose after recording.